How are the mask machines maintained?

The daily maintenance and maintenance of the mask machine is very important. Usually, we do more irregular maintenance of the mask machine, which can make the mask machine work more efficiently, and also greatly improve the workers' work. So in detail, how do we maintain the mask machine?

The plane mask machine can be maintained according to the following aspects, and it is necessary to shut down the power supply during the maintenance process.

1. Ultrasonic system

We need to check in advance whether the system of the ultrasonic mask machine is kept clean at all times, especially the ultrasonic electric box, the welding head and the vibrator must be kept dry and clean, and the connecting line needs to be checked frequently for firmness and order. In addition, we check The wear degree of the ultrasonic welding head also needs to pay attention to the variation range of the voltmeter and ammeter pointer on the ultrasonic box.

2. Pneumatic system

The air filter cup of the mask machine equipment needs to be checked to see if there is any water discharge, and the air compressor should be discharged by the way. For areas with high humidity, the air compressor needs to be discharged every day, so as to check whether there is any air leakage in all air pipes and cylinders. Ensure that the equipment can operate normally when it is working.

3. Appearance

Our masks are worn on the face, and medical masks need to follow the doctor into the operating room. Therefore, the production of masks requires high requirements on the cleanliness of the mask machine equipment, so basically we need to wait until after get off work. , Arrange some special cleaning personnel to clean and maintain the mask machine equipment. Wash the work surface of the equipment and the plate containing the mask. However, it should be noted that the equipment cannot be washed directly with water. At this time, some volatile cleaning solutions of alcohol need to be used to clean the mask machine.

4. Electrical system

Check whether the circuit connector of the mask machine is loose, whether the main power cable and branch signal cable are worn or aged, whether the power cable is in a dry environment, and whether the exhaust fan on the device can work normally.

5. Transmission system

The transmission system includes the main components such as electric motor, gear, reducer, sprocket, chain, conveyor belt, etc. We need to check whether the motor is attached with dust or other items that affect heat dissipation, whether the gears and sprockets are oiled, and if there are some attachments, it needs to be cleaned up at this time, whether the tightness of the chain is appropriate, and the distance between the various transmission components. Whether the connecting screws are loose, and the lubricating oil of the reducer is not enough. Usually, we need to replace the machinery and equipment every 1000-1500 hours.

6. Anti-rust

Corrosive liquids and objects, including sweat, are not allowed to stick to the plane mask machine equipment. Because sweat can easily cause parts on the device to rust. If the equipment is not working for a long time, it is necessary to apply anti-rust oil on the transmission system and rust-prone parts of the mask at this time.